MHIC #117311 · Maryland Service Area

Whole-Home Renovation in Maryland

Whole-home work is where most contractors break down — too many trades, too many decisions, too much liability. We took on this scope deliberately. Since 2005 we've remodeled top-to-bottom in Bethesda, Potomac, Towson, and Annapolis. One project manager. One signed price. Real timelines.

Whole-Home Renovation in Maryland — service illustration, Eagle Home Improvements

Quick Answer: Whole-home renovations in Maryland typically run $120,000–$400,000+ over 4–8 months. Eagle Home Improvements manages every trade — kitchen, baths, floors, walls, mechanicals, exterior — under one MHIC license (MHIC #117311) and one fixed-price contract.

Pricing

Whole-Home Renovation cost in Maryland (2026)

Scope	Investment range	Includes
Mid-tier whole home (2,000 sq ft)	$120,000 – $200,000	Kitchen, 2 baths, refresh of all surfaces, paint, flooring throughout.
Premium whole home (2,500 sq ft)	$200,000 – $350,000	Custom kitchen, primary suite, finished basement, exterior refresh.
Luxury full gut (3,000+ sq ft)	$350,000 – $700,000+	Down to studs, structural changes, full mechanical replacement, top-tier finishes.

Ranges reflect Maryland market conditions for 2026. Final price depends on county labor rates, fixture grade, and structural complexity. Free fixed-price quote after one in-home visit.

Process

How an Eagle Home Improvements whole-home renovation project unfolds

01Master planHolistic plan: phase order, livability strategy, budget tier per room, full schedule.
02Design packagePlans, elevations, all material selections, finish boards, 3D renderings.
03Engineering + permitsStructural, electrical service upgrade, plumbing rough plan, mechanical permit set.
04Phased buildSequenced to keep livability where possible, or full vacancy with accelerated schedule.
05Trades orchestrationIn-house licensed crew handles 80%+; specialty trades coordinated and quality-controlled by us.
06Punch + closeMaster punch list, final county inspections, signed comprehensive warranty package.

Materials we use

Trusted brands across every whole-home renovation project

Tier-matched to budget — premium brands available across cabinets, counters, flooring, fixtures
Energy-efficient mechanical (high-SEER HVAC, on-demand water heaters where applicable)

Permits & code

Maryland permits we handle

Whole-home work usually requires multiple permits: building, electrical (often service upgrade), plumbing, mechanical, and sometimes structural. We file all of them and manage the inspection sequence.

Verify our credentials: MD MHIC License Lookup · MD Home Improvement Commission

Warranty

5-year workmanship

5-year workmanship warranty across the entire project plus manufacturer warranties on every system.

Sub-services for whole-home renovation

Every whole-home renovation sub-service we offer in Maryland

Eagle Home Improvements handles every variation of whole-home renovation — from quick refreshes to full custom builds. MD-specific notes flag county code, climate, or market considerations for each.

Open floor plan creation (multi-wall removal)Removing 2+ interior walls with engineer-stamped beam plans for full open-concept living.MD note: Common in mid-century MD homes. Multiple beams + structural posts + foundation reinforcement typical.
Full mechanical system replacementNew HVAC, electric service upgrade, full re-pipe, hot water on-demand system.MD note: 1940s-1970s MD homes typically need service upgrade from 100A → 200A. MEA rebates available.
Period-correct historic restorationPreservation of original detail (crown, hardwood, plaster) while modernizing systems.MD note: Annapolis Historic, Roland Park, and Baltimore historic districts. We work with HPC + the Maryland Historical Trust.
Energy-efficient envelope upgradeContinuous exterior insulation, dense-pack walls, high-performance windows, blower-door testing.MD note: Code R-value: R-21 walls, R-49 roof in MD climate zone 4. Pays back in 8-12 years.
Whole-home interior repaint + millworkCoordinated palette across all rooms, refreshed crown/base/casing, hardwood refinish.MD note: Sherwin-Williams or Benjamin Moore — MD homes look best in warm whites + saturated accent rooms.
Hardwood floor refinishing throughoutSand existing hardwood, stain to current trend, finish with satin polyurethane.MD note: White oak natural is 2026 default. Old red oak can be lightened with Bona Nordic Seal.
Smart home wiring + integrationCat6, ethernet drops, smart switches, Lutron lighting, Sonos audio pre-wire.MD note: Montgomery and Howard County homeowners routinely request this during whole-home work. Adds $8K-$25K.
Kitchen + 2-3 baths combined scopeCoordinated renovation of kitchen plus all bathrooms — single contract, single timeline.MD note: Most efficient sequencing — same trades return for each space, 30% faster than sequential.

Maintenance — keep it perfect

How to maintain your whole-home renovation in Maryland

MD climate (humid summers, freeze-thaw winters, high pollen) is harder on finishes than coastal CA or arid SW. These tips extend the life of your investment by years.

Twice yearlyAnnual professional HVAC serviceSpring AC service + fall furnace service. $200-$400/year. Catches refrigerant + venting issues early.
QuarterlyReplace HVAC filtersStandard 1" filter every 90 days. 4-5" media filter every 6-12 months. Set phone reminder.
Monthly + annual batteryTest smoke + CO detectorsPress test button monthly. Replace 9V backup batteries annually. Whole units last 10 years max.
Annual + after major stormsAnnual roof + gutter inspectionVisual from ground or with binoculars. Check for missing/curled shingles, gutter sag, downspout clogs.
AnnualCaulk + paint touch-up exteriorInspect window perimeters, door frames, exterior trim. Touch up failed caulk and paint.
QuarterlyTest GFCI outletsPress test button on bathroom + kitchen + outdoor GFCI outlets. Reset works = good. No reset = replace.
AnnualDrain water heater (sediment flush)Connect hose to drain valve, run until clear. Doubles tank lifespan in MD hard-water areas.

FAQ

Frequently asked questions about whole-home renovation in Maryland

How much does a whole-home renovation cost in Maryland?

Most Maryland whole-home renovations run $120,000–$400,000 in 2026. Per square foot ranges $60–$200 depending on whether you keep the floor plan or take it to studs.

Should I move out during construction?

For full guts, yes — the project completes 30–40% faster and costs slightly less without livability constraints. For phased work we keep one floor functional throughout.

How long does it take?

Typical whole-home renovation runs 4–8 months from demo to final walk. Design and permits add 6–12 weeks before that.

Do you handle exterior + interior?

Yes — siding, roofing, windows, decks, and landscaping coordination are part of our whole-home scope when needed.

Can you handle structural changes?

Yes. Wall removal, beam installation, foundation reinforcement, second-story additions — all coordinated with our structural engineer partners.

What about HVAC, plumbing, and electrical replacement?

Whole-home renovations are the time to replace aging mechanicals. We handle service-panel upgrades, full re-pipe, and HVAC replacement in-house.

How do you keep the project on budget?

Fixed-price contract after design freeze. Change orders only when scope actually changes — never as a sales tactic.

Do you offer financing for large projects?

Yes — partner lenders specialize in renovation financing including HELOC alternatives and renovation construction loans.

Other services

One MHIC-licensed team for every Maryland remodel

Top service areas

Whole-Home Renovation across Maryland

From the Field

Whole-Home Renovation — recent work by our crew

Open living room after whole-home renovation

Room remodeled around a fireplace opening